Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

3 link rear susp, roadcourse.

Status
Not open for further replies.

coryboy

Mechanical
Jun 26, 2006
2
Hi , I'm looking at using a 3-link rear suspension on a road coarse car, RWD live axle. The length of the lower arms is 22in & is fixed (rules), any suggestions on the upper link angle & location would be appreciated. This link could be up to 50in if need be. Cheers.
 
Replies continue below

Recommended for you

That's been discussed several times, try the search function

Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Sorry guys but I don't see anything relating to a long single, central upper arm in any of the areas you spoke of ?.
 
Pages 15 and 16. (Don't be misled by the "dragracing" reference. This is an asymmetry equivalent to that used by Jaguar in the early C-Types.)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor