Dec 8, 2019 #1 spigor Mechanical Aug 4, 2006 269 Recently I have come across a 1.8Mod 30PA spline. Does anybody know, what standard is that, if any? Thanks!
Recently I have come across a 1.8Mod 30PA spline. Does anybody know, what standard is that, if any? Thanks!
Dec 28, 2019 #2 mfgenggear Aerospace Jan 23, 2008 3,446 Hi Spigor did you get it ? I believe its a special. designers mixing it up, hard to reverse engineer. did you measure the major, minor, and the base pitch? what application? Upvote 0 Downvote
Hi Spigor did you get it ? I believe its a special. designers mixing it up, hard to reverse engineer. did you measure the major, minor, and the base pitch? what application?
Dec 28, 2019 Thread starter #3 spigor Mechanical Aug 4, 2006 269 Here are the measurements: T=19 da=31.725 mm df=34.978 mm Yes, it's an internal. 1.8M 30PA look good when checked on a Precision Measuring Center. Upvote 0 Downvote
Here are the measurements: T=19 da=31.725 mm df=34.978 mm Yes, it's an internal. 1.8M 30PA look good when checked on a Precision Measuring Center.
