I haven't looked into it lately but the old ProFlythru program would automatically make pics of every view that was saved in the model/assy.
Unfortunately its replacement, ProductView, doesn't do this.
procadman2
Proe Design & Admin
NASA Contractor
"You can't build a reputation on...
You can send it to me and I'll try it for you if you like.
procadman2
Proe Design & Admin
NASA Contractor
"You can't build a reputation on something you haven't done."
H Ford
This is one of the attributes of the ISO system.
It is many seperate standards. Therefore each section can be updated much more quickly and can be sold seperately.
procadman2
Proe Design & Admin
NASA Contractor
"You can't build a reputation on something you haven't done."
H Ford
Surprisingly I haven't ran into this before.
I can't find a refernce to 6.5, 13, or 25mm nominal sizes.
(Machinery Handbook 26th edition or a Holo-Krome slide ref.)
I also haven't seen these sizes in the last 10 years or so while using metric hardware exclusively. They almost seem like...
Just to add 2 more cents...
Many high end software programs do not allow deviation from the ANSI/ASME standard of large dim on top.
Personally I do not like using "limits" Most machinists/programmers will shoot for the median dim. The true tolerance also is not always obvious. This...
Rule of thumb for any PTC product:
Treat it like Unix.
The software is still writen for Unix and rewritten (translated) for other systems.
(Proes default installation to Program Files will not work with some of the add-on software because of the space in the directory name. DUH!)
procadman2...
This might be something as simple as a corrupt protable executable.
Short of reloading Proe you might try overwriting the executable in the bin directory with an older backup.
Also you might try running it from the bin directory.
If it works it will tell you whether it's the...
You can save any light or color files you create.
I mapkey the generic settings: resolution, file name, etc.
procadman2
Proe Design & Admin
NASA Contractor
"You can't build a reputation on something you haven't done."
H Ford
Sorry, I haven't been that route.
If I get time I'll try it and see if I can overcome the thick line problem. (I have limited access to software here. It's a government owned facility.)
procadman2
Proe Design & Admin
NASA Contractor
"You can't build a reputation on something you...
One way to control line thickness is to plot the proe file to postscript and then covert that file to pdf using Adobe or GPstill or something similar.
procadman2
Proe Design & Admin
NASA Contractor
"You can't build a reputation on something you haven't done."
H Ford
Perhaps a temporary solution would be to show the model version on the drawing.
Once you found what the newest version is, assuming you never used the backup command into an empty directory which restores the version number to 1.0, you should be able to spot older data without checking every...
The files would need to be in a database Intralink can see.
This can be any database on any computer.
I have done this in the past and it works very well.
Unfortunately I don't have access where I am currently and I can't give you a step by step.
If I can find the "how-to" I'll...
Please explain your problem a little better.
Is this a pattern table that you are attempting to modify or does the feature refuse to pattern when the model is opened?
Beginning with i or i2 the pattern tables show up in a drop down menu.
Did you recently install i2 from an older version...
MIL-STD-961 is another example of Military versus the real technical world.
I have a manual written by someone who assumes he understands 961.
Instead of listing required steps in a standard fashion, ie: 2.1 2.1a 2.2 etc., the author begins each requirement with "shall". This goes...
Are you sure it's reading the config you are searching?
It will read the one in the startup (bin) directory if there is one.
Using NT and creating a shortcut to the desktop will allow you to read one in a working directory.
One more thing...
If you load the config after you start a model or dwg...
At the risk of adding more confusion to this topic I'll submit this:
All Technical English and Technical Writing manuals/textbooks, not to mention English grammar textbooks, I have read advise against using "shall" in any way shape or form. The manuals cite something similar to...
One more option, with only the "foundation" module, is to
create a "component display" via VIEW/MODEL SETUP/COMPONENT DISPLAY.
This allows you to blank or phantom any part and save that display.
This was #VIEW;#COSMETIC;#COMP DISPLAY;#SET CURRENT;
prior to 2001...
Is there any code for tube bending?
I've found many for fittings, flaring, beading, etc but none for bending.
procadman2
Proe Design & Admin
NASA Contractor
"You can't build a reputation on something you haven't done."
H Ford
Intralink locks out many attributes/parameters on generic parts/assys. You are usually required to open the generic file and change the attribute/parameter there.
Adding parameters is a different story.
It's often easier, when needing to add parameters to several models, to bring up or...
I'll add another avenue.
Every time you save said modified part/model/assy it creates a higher .number in your working directory.
.proi/[workspace_name]
If you rename the older ,numbered file to a higher number than the latest filed then import it into Intralink over top the current file it will...
