Hi,
I use Piping design to create a pipe run but have trouble to create Line ID because the session ask to set a directory for
Line lists in Project XML files that has write access. I watch on Youtube and see somebody advise to edit Projectdata.xml files
but I don't want to screw up the setup...
Hi,
For composite part design; as far as I know, there's a requirement of 2.5D edge margin. For metallic part, the edge margin is defined as the distance of fastener hole center to the nearest edge of part, but for composite part, how do we define this E/D? In addition, for the composite...
I used to run CATIA V5R20 on the laptop running Window 7 and it works fine. When I upgrade my operating system to Window 8.1, CATIA does not work anymore. I try to run Compatibility Troubleshooter and change the Compatibility Mode to Window 7 but the application does not work too. Does anybody...
Hi,
I currently do a trade study on the gear doors design to make easier and faster for rigging and installation. Upon installation, the gear door need to be fair (gap and step) with the adjacent panels. To achieve this goal, the door need to swing along the fwd and aft hinge/fitting hinge...
Hi,
Is there any design rule of thumb when designing a metallic (Aluminum or Titanium) and Composite detail part? For weight saving, if we change the metallic bracket (.063" Al. thick) to composite bracket assuming that the applied load is the same, what should the thickness of the composite...
I am doing an angularity mismatch study on determinant assembly holes between two composite parts. Both parts have two determinant assembly holes of .1285 dia. drilled. What is the allowable angularity mismatch (in terms of degree) between the hole center line on two parts if they are pinned...
