Hello,
I am not an electrical engineer, so please be patient with me.
I'm trying to simulate a waveguide with a dielectric material load. I've set a source power of 1 W. The waveguide cross section area is 84 cm^2
If I plot the electric and magnetic fields along the cross-section of the...
I've analyzed a jib crane design analytically and via FEA. The FEA results do not match up with the analytical calculations.
For example, when analyzing this connection between a piston and a post:
I assumed this weld pattern:
with the welds being 9 mm fillets.
The connection is loaded...
I am analyzing weld stresses during vibration for fatigue. The mesh consists of shell elements.
When modeling fillet welds, I set the weld size to half the actual weld size, to simulate a mid-surface. I set the weld elements thickness to the effective throat size:
The weld is modeled using...
I've modeled a rectangular tube being clamped via a pretensioned bolt:
The tube is 10 mm thick (steel) and is fixed at one end. The pretension force is 50 kN.
I also modeled a 50 kN nodally-distributed force on the washers of another connection, to compare the results:
The contacts between the...
I designed a spring and mass system (damping unknown) that is vibrated by applying a sinusoidal force to the mass using an electrodynamic shaker.
The mass is estimated to be 100 Kg.
The spring is actually 4 springs, each with a k value of 63.55 N/mm, supporting a platform (one spring at each...
