Hi All,
I have a big problem and sincerely I do not know how can I solve it.
I'm talking about a surface condenser for Power Generation Plant which condense the steam coming from the turbine outlet.
The project involve an existing condenser which has worked since 20 years ago. So my company...
Hi everybody,
I have to purchase some pressure vessels and some filters which shall contain well water.
The process specification says that the Vessel can be designed and manufactured taking into account as main material Carbon Steel plus 3mm of corrosion allowance plus glass flake as internal...
Hi everybody,
does anyone know if the Maeterial SuperDuplex S32750 (as a billet, tube, etc...) is covered by ASME VIII Div.2?
Can I design an Equipemnt considering ASME VIII Div.2 taking into account the mentioned material as a pressure parts?
Any help on the matter would be greatly...
Dear All,
I have to buy eleven air coolers in which the bundle is designed as per follow conditions:
-Design Pressure of 325 bars (g)
- Temperature design of 90°C
The material proposed, during the bid phase, from different Vendors is a Super Duplex Type 2507 in order to be in line with the...
Hi All,
I have had a discussion with my client about the Hydro Test pressure that could be used when a Vessel is designed for a Vacuun or Partial Vacuum.
I have some Pressure Vessels that are designed for 0.5/-1 bar(g) and my client required me to hydro test the Vessel at a pressure equal to...
Dear All,
I’m following the supply for Equipment which is designed in accordance with ASME VIII Div.1 but the design pressure is equal to atmospheric pressure.
As scheduled on relevant QCP the Vessel shall be subjected to Hydrotest full water filling it in Vertical position.
Some days before...
Hi Guys,
I'm checking for the design calculation of Fixed Tube Sheets HE (Tubesheets integral with Shell and Gasketed with Channel).
The channels are coupled to the Tube Sheets with girth channel flanges designed in accordance with ASME VIII Div.1 "Appendix 2".
Does anyone know if the channel...
Hi guys,
I work in an italian engineering company where a short time ago was bought Compress Software. I'm in charge to looking for a Compress training but unfortunatly the CODEware training are carried out only in the corporate headquarter (Florida).
Can anyone suggest me some web site or some...
Dear All,
I'm checking the Vendor Documents for a Big Vessel which should be had the shell courses and other welded parts in contact with the process fluid made by SS Tp316L as specified into the Client Mechanical Data Sheet.
The proposed Material by Vendor is double certified Material SA-240...
Dear all,
I'm checking for the Mechanical Calculation, made by Compress, for a big Vessel(Crystallizer) designed according to ASME VIII div.1 (Design Pressure 0.5/-1; Design Temperature 100°C). From the top to the bottom, the vessel is made as follow: the inlet nozzle with an Ring type integral...
