I have a generator that is fastened to a rail/slide assembly that can be pulled out from the vehicle to have maintenance done to it. Someone suggested using a quick release pin (http://www.mcmaster.com/#standard-quick-release-pins/=l17wjw) to secure the generator in place. My question is this...
Hello all,
I am collecting requirements for a customer for a small project, and I am hoping someone here might be able to provide some insight.
Basically, power conduit needs to be installed in the ground at a site at a depth of 2 feet that connects a communication shelter to a building (this...
All,
I have been tasked with writing test procedures for an HVAC system. I searched the web to find a template or example of an HVAC test procedure, but could not find what I needed. Do any of you have an example or know what should be in an HVAC test procedure?
Also, could someone explain...
All,
I’m a recent grad in ME, so my experience with real world problems is limited. I have been tasked with analyzing the HVAC of a server room with an area of about 500 sq. ft. and a raised floor. I don’t have any experience with HVAC analysis, but here is my approach:
1. Determine through...
Hello all,
I am mounting an antenna on a roof of a building, and I am trying to figure out the wind loads it will experience. Once I have these loads I can calculate the stresses on the bolts it is mounted on. Here is my question:
How will the angle of the roof (14 degrees) affect the wind...
Hello all,
I am mounting an antenna on a roof of a building, and I am trying to figure out the wind loads it will experience. Once I have these loads I can calculate the stresses on the bolts it is mounted on. Here is my question:
How will the angle of the roof (14 degrees) affect the wind...
