Just wondering if anyone here has advanced a CDI unit. I was thinking of mapping the peak cylinder pressure against crank angle for a race engine I am developing and then tweaking the ignition timing so that I am achieving peak pressure at the optimum angle for a particular RPM range. I was...
Hi, just wondering if anyone has any opinion or info on this... I am currently building a race bike and due to limited budget I am going to be using the stock exhaust system. Firing order is 1-2-4-3 and the downpipes are linked 1 to 4, and 2 to 3. The collector is a 4-2-1. The cam profiles...
Hi all, just a quick question about building up areas of the intake runners etc...
I was just wondering if anyone could recommend a particular type/brand of epoxy or another suitable substance. I know a lot of engine builders use epoxy for this but I don't know which type and I'm reluctant to...
Hi all, hope someone can help here. Have scoured the net for this info but to no avail :(
I'm look for cam lifts, durations & opening times for a ZXR400-H. An older thread by MBurgess yielded the lifts & durations (thanks!) but just wondering if anyone (Mburgess ;) ) knows when they open...
Hi All,
hopefully someone will have experience of something like this !! - I am using a micro epsilon laser/camera displacement sensor to measure surface defects. The laser is accurate down to .25um so picks up quite a lot of the vibration as it is being moved over the surface (movement is...
Hi All,
hopefully someone will have experience of something like this !! - I am using a laser/camera displacement sensor to measure surface defects. The laser is accurate down to .25um so picks up quite a lot of the vibration as it is being moved over the surface (movement is achieved through...
Can anyone direct me to a good website or link with some info on this topic. I have the summary of the Robinson/Lippold paper but was just looking for more info.
Many Thanks,
DC.
