For a deck plate of 18mm thick, I would like to add a bracket type structure on the deck plate.
I wish to provide fillet weld of 25mm between bracket and deck plate which is carrying shear load. Is it possible?
Thanks,
I am trying to lift a spool. Simple straight pipe spool 10"x 1/2" WT of 45 m length.
To avoid excessive bending, I am using 4 slings from the hook located to carry approximately equal loads.
My understanding was, the axial buckling length will be defined as the length between individual...
I have to design/build, lift and install offshore, a trussed arrangement. The requirement is to have a box of 1.2 m wide and any suitable depth. So, I have come up with two trussess spaced at 1.2 m and depth of 400mm (something like steel joists). To minimize weight and as per requirement, the...
I am doing a lift analysis using SACS software. I have modelled the diagonally opposite slings attached to two coincident nodes. One of these nodes is fixed in three degrees of translation, the second is free to translate in the vertical direction. A load equal to 25% of the total weight is...
