Greetings!
I have been asked to come up with a method of checking the sealing integrity of a double O-ring static seal arrangement. There is an interspace with a test tapping point. The seals are pressurised from the outside.
The acceptance criteria for the seal integrity is a specific volume...
The technical specification we have received from our customer says that 50 litre bottles will be supplied with a mixture of gas A and gas B at 200 barg. We also know that gas A will be 4.5% by volume and gas B 95.5% by volume. The temperature is also known.
How do I go about calculating what...
The default mass unit on my installation of NX4 is 'kg'. However, when I try to assert a value for mass only, the prompt line says 'Assert values (in G -Mm) or mark as unknown'.
Does anybody know why G i.e. grams seem to be the default or where it can be changed to kilograms instead.
Thanks in...
Does anybody have any info on Ferodo MP brake coating material? I am trying to find a modern equivalent as the MP spec may have contained asbestos. If you have a datasheet, so much the better.
Thanks in advance.
Can anybody suggest a suitable design code (British or European preferably) for a vertical stainless steel storage tank which will contain an acidic solution?
The tank will have removable heaters, probably electric, to raise the temperature of the contents to about 50 deg Celsius. Will this...
Is there a defined number of entities within a sketch (i.e. curves and constraints) above which the software cannot cope?
Is this defined by the memory and speed of the computer?
Thanks in advance.
Fred.
Has anyone tried to use this standard to calculate the wind load on a cylindrical silo. I have got as far as getting the dynamic pressure, qs, but have no idea how to use Table 7 to get the overall pressure coeffient. Do I have to sum all the coefficients for every angle on the periphery and...
We will be receiving some models in Catia V5 format (catpart and catproduct) from our customer and will need to translate it into UG NX2 format to use as interface information. At some later stage we will have to convert our models into CATIA files. The models are very likely to contain...
I am trying to size an I-beam to be used as a strongback when machining a stainless steel plate 1300mm x 160mm x 30mm (LxWxD approx). Deflection is expected to be about 35mm out of the 1300x160 plane.
Q1. Can I assume that the stresses induced by machining are equivalent to a cantilevered beam...
I'm trying to place 'gap' symbols on dimensions created in Drafting (Add to drafting object).
UG seems to have a mind of its own and decides for itself where it wants to place the symbol. When I try and move it using Edit > Component > Move, it is still fussy about where it is put.
Is there...
I'm having trouble editing a drawing in that when I select Edit > Drawing Object Associativity and select a dimension, I get an error message saying "Cannot edit associativity for sketch dimension". What would be causing this and how can it be solved?
Thanks in advance.
When you deactivate a sketch in UG the dimensions etc are supposed to disappear. However in a sketch of mine, this isn't happening. Does anybody know what's causing it and also how to fix it?
Thanks
Is it possible to create Assembly families using the part families tools? They would have to be capable of being called up in UG Routing.
Another website I have looked at mentions using placeholders.
Has anyone got any hints or tips, please?
Thanks.
BTW, I am using UG v16.
I am trying to create an interpart expression in UG v16 between the top level of an assembly and a component part. I have created an expression at the top level and applied it. When I go to the component part and try to reference this expression using Tools > Expression > (Select expression to...
