API 610 S-6 materials indicates carbon steel pressure casings and 12% Cr trim.
Can anyone confirm in the case of barrel pumps (BB5), can we accept carbon steel materials for both the outer and inner casings.
API 610 S-6 materials indicates carbon steel pressure casings and 12% Cr trim.
Can anyone confirm in the case of barrel pumps (BB5), can we accept carbon steel materials for both the outer and inner casings.
Let me know if anyone has experience on MAG sealess pump to API 685.
Adivise on Prime factors to be considered in selecting a MAG pump for rich amine service with presence of solids and sulphide corrosion.
Advise on Instruments and controls for bearing erosion, chamber temp. and shell failure...
We have to design heating tanks where sludge is stored and heated through steam coils.This tank is to be installed in a sludge treatment unit in a crude storage terminal. The tank is a rectangular tank with a dimensions of 30'x8'x8'. Like to know what design standard to be applied to design the...
We have to install a pump to pump out gasoline with traces of water from an open sump. Density of the liquid is around 600 cu. m/kg. The NPSH is zero and the discharge pressure is 6 bar abs and the flow is 5 cu. m/hr . The pump should should not be a vertical type which is a constraint. Like to...
We are going to install a vertical turbine type centifugal pump with three stages. It is going to pump process effluents to the sea from an holding basin. One manufacturer has offered radial vane type impeller and other with a diffuser. Vendor with the diffuser claims diffuser type impeller...
