Does anyone know of a formula that will reveal the microstructure of tantalum?
We are cutting .080 tantalum in a CO2 laser. To evaluate the quality of the cut we must cut a cross-section and look at the recast layer and grain boundaries of the base metal. So far we have used the etchants we...
Hello,
Does Unigraphics NX 2.0.2.2 (or previous versions) support the engraving of text onto a solid? That is, how does one make a "word-shaped" hole?
Regards to all,
CoffeeMan
Hello,
I have been charged with qualifying a Unitek/Miyachi High Frequency DC Inverter resistance spot welding unit for use with Nickel/Cobalt superalloys (URL: http://www.miyachi1.com/Product_Item_View.asp?ID=13).
I am experimenting with settings for .059 thick Hastelloy X, and have been...
What is the latent heat of fusion of the nickel superalloy Hastelloy X?
I know specific heats up to about 1100 celsius, and I can use trendline extrapolation to find ones at temps up to 1260-1355 C (melting range) if I want. But I haven't been able to find any data on latent heat for this...
What is the latent heat of fusion of the nickel superalloy Hastelloy X?
I know specific heats up to about 1100 celsius, and I can use trendline extrapolation to find ones at temps up to 1260-1355 C (melting range) if I want. But I haven't been able to find any data on latent heat for this...
Hello,
we have a Trumpf 2200 watt continuous wave CO2 laser we use to machine sheet metal. Occasionally, it is necessary to perform a laser power output calibration, or Puck Test (labeled so because the laser power probe resembles a hockey puck).
When the machine was brand-new, output...
I'm just wondering...
I've got some .012" thin test coupons of AMS 5510 (321 s/s) which will be spot welded. There is a dull gray color on the surface of the coupon, which when ground off reveals the shiny metal underneath. What is this dull gray coating? And is there any way to remove...
The AWS C1.1 spec "Recommended Practices for Resistance Welding" states in Table 20 "Spot Welding Parameters for Stainless Steels" the appropriate parameters for spot welding sheets ranging in thickness from .006 to .125 inches.
I am confused about the Net Electrode Force...
