Hi
Nowhere near my reference books. Anybody have Poissons and Modulus of Elasticity for Aluminium 2024 Bar diameter 35.5mm in the T6 condition close to hand.
Thanks
I have a shaft which is required to move linearly a total of 40mm. One end of the shaft is connected to a lead screw and motor while the other end is connected to my load which is in a dirty environment. The seal needs to meet IP69K (100 bar, 80 Celsius jet wash water at 150mm distance for 2...
I originally posted this on 'Mechanical engineering other topics'. I have been asked to now post on this forum instead. Apologies if anyone has already read.
I have a slender square aluminium (6082 T6) column that is 44mm square and 160mm long. A load of 2250N is taken through the centre of...
I am designing a piece of continuous processing equipment that is subject to temperature extremes (-20 to 45 Celsius) and is also subject to high pressure water jets. I need to monitor a load (only up to a couple of hundred kg's) continuously within this environment with a system that is...
An assembly I'm currently designing is exceptionally tight for space. I want to see how much access I have with a standard 8mm spanner (closed one end, open the other). Anyone know where I can find a drawing showing typical spanner dimensions that I can model for insertion into my 3D model...
Hi
To aid manufacture of a shaft I am looking to put an undercut in the corner between the bearing seating and a shaft shoulder. The bearing is a 6000 series unit (ID 10mm, OD 26mm, width 8mm). The bearing has a radius of 0.3mm on its corner. Unfortunately all the bearing catalogues don't...
Hi
I have a reasonably large assembly model with sub assemblies contained within. I'm looking to output the file for taking into ProE or Ideas. Anybody have an experiences here.
I'm guessing that *.step or *.iges are most suitable however what are the best options to use. Ie should I use...
Hi
I am operating in a wet / frozen food environment. I have a shaft application where 316L stainless steel is overstressed.
Some web research has turned up EN 1.4462/ASTM S32205/ASTM 31803/ASTM32203/2205 duplex stainless as a potential candidate.
It is hinted at that this duplex grade is more...
