Search results for query: *

Hi, I am trying to flow steam into a chamber using a ideal variable componet, using water ideal gas and air ideal gas, but when i run the calulation I am not getting what i expect, i have buoyancy switched on etc. Has any body tried this before? am i using the correct approach?

Hi I have about 80 drawings to be plotted (into pdf) is there any batch plot in pro e, any body use it?? Thanks

I have a round on a part, of 0.5mm, but when i edit the main extrusion of the part to 10 meters long, the part crashes. the same if i have the part 10 meters long, the smallest round it will let me enter will be 1mm. Is there some setting somewhere i can change? thanks P

Hi, I have a 12mm thick beam and i am feeding wires through it. I am currently using a plastic cable gland, but i want to use some type of rubber grommet. The cable size is about 18mm in dia and i need the grommet to seal(IP66), but it needs to fit this 12mm thick beam, a lot of grommets are for...

HI, I am looking at using a plastic molded can to house some electrial parts. It is going to be used in a hot and humid enviroment, about 60 - 70deg C. I have to make sure that the can can't leak or any moisture enter the can. The dim of teh can would be 170mm x 175mm x 275mm, the top of teh can...

I have a load in a horizontal furnace, i heed to turn the load that it is vertical, it is some wafers in a test in the lab, does any body know what effect this will have on heating the wafers up uniformily? Is there a design of element / baffels i could use? Thanks

Hi, I have a chamber which is in Vacuum, and I have parts that I want to cool down. The problem is the vacuum! The parts are cooling very slow, due to the fact the only heat transfer is radiation. I need to speed up the cooldown? in a controlled mannor. I have to keep the parts in a vacuum until...

HI, I am looking for stainless steel which needs to have a dull fininsh, i need the best heat transfer, heat transfer to teh stainless is due to radiation on one side, and water flow (forced convection) the other. What finish can I get? Thanks

is there any way of linking attrributes of a part to the title block? mdt5 thanks

Looking at designing a cooking oil storage tank which has to staore 17,500 Liters of cooking oil. Can any body give me any tips, to get the presure on the side of the tank, i take the densidy x height x 9.81, for a given point, am i correct? The tank will also need a support frame, any body any...

What would the best stainless steel material for a atmospheric furnace which max temp is 500 deg C. 316L? or 304L? or any other types? Can you give me a reason Thanks

any links for material library's or values for gases etc. I am using design space. Thanks

HI, Trying to seal a quartz tube with stainless steel flange, this is in a furnace which can operate at 500 deg C, I was going to use a hight temp oring, with water & gas cooling in the stel flange. Does anybody know of a ,metal seal i could use?? Thanks