Dear all,
I am looking for manufacturers of transparent pipes for "high pressure" applications.
Typically up to max. 30 bar.
Flow typically 100 kg/h.
Typically 20 mm to 40 mm (millimeter) diameter for the pipes.
We have a non-transparent, viscous product containing hard crystalline salts, so...
Dear all,
Does anyone has a simple (DYNAMIC) model (massbalance) of a gas - liquid mixer?
So, liquid stream and gas stream as input and two-phase mix-flow as output.
Help is appreciated,
CARF
Dear all,
Does anyone has a (DYNAMIC) model (+ massbalance) of a gas - liquid mixer?
liquid stream and gas stream as input and two-phase mix-flow as output
Help is appreciated,
CARF
Dear all,
Does anyone of you has practical experience with the systems from Artesis?
The unique Artesis intelligent predictive maintenance system is suitable for most electric motor-driven equipment, as well as generators. It diagnoses a very wide range of electrical and mechanical faults...
Dear all,
I found this sensor to measure Humidity in Hydrogen Peroxide (H2O2) Atmospheres (for sterilization purposes).
The use of hydrogen peroxide (H2O2) as a sterilising agent in healthcare and production processes is extremely important to health and safety and has been growing in recent...
Dear all,
Does anyone of you know manufacturers of in-line measuring systems for density of powders? The powders we produce typically have a density of 30 kg/m3. We want to measure (and control) in-line density.
Many thanks,
CARF
Dear all,
We encounter increasingly vibrations over a period of 12 hours on hour decanter centrifuge. Probably the machine gets fould because after a hot water flush (cleaning) the oscillations dissapear. Does anybody has experience with this and how to solve it? Typically we want to run much...
Dear all,
We are thinking of applying a frequency inverter to a motor wich controls the liquid level in a vacuum condenser (through a centrifugal pump).
Has anybody experience with VSD-drive level control in an industrial vapour condenser?
Many thanks for sharing knowledge,
CARF
Dear all,
We measured the power take up of an old cenrifugal pump.
It has 50 kW motor which is taking 35 kW electrical power.
Is there any generic method I could apply to get a very rough idea (+/- 30%) what flowrate this pump is producing?
The feed piping is 400 mm, 2 meters long , 1 meter...
There are places in the world where it is hard to get clean water to drink, or clean water cannot be afforded. If it is in a humid climate there is lots of water evaporated in the air, that could be condensed and dripped down into a jar by coming into contact with a cold surface. So what if you...
Dear all,
I'm looking for process equipment to cut the peels of fruit (apple, tomato) to very small pieces. Any suggestions?
Not kitchen machines, but rather the large scale continuous equipment.
Thanks for posting,
CARF
Dear all,
I need a food grade (hygienic) 3-way control valve. So to Split ONE flow in TWO flows; 0 - 100% adjustable.
Can you suggest some good manufacturers? Types?
Many thanks for posting,
CARF
Dear all,
Does anybody know of sensors (elctro magnetic flowmeters?) which are capable of measuring the Velocity Profile of the flow?
So not only the average flow, but also the flow at any position across the pipe diameter.
Many thanks,
CARF
Dear all,
For an in-line pipe dosing system we are considering dosing NaOH at the INLET of the main (mono)pump. Through this we want to avoid problems with high fluid pressures we expect when dosing at the pump outlet. Furthermore the pump may function as a MIXING device.
What you think?
Good...
Hi all,
Anybody experience with this meter? See below:
Foxboro has introduced a mass flow transmitter with digital technology that allows standard Coriolis flow meters to continue operating during two-phase flow, which happens when air is introduced into the liquid flow stream.
The...
