I have a small hillside lot site that I would like to put a 30x30' building on, with machine tools on the (walkout) 1st floor and parking for 2-3 cars in an enclosed garage ABOVE. There is not room for a larger footprint. The lower level is level to the street on one side of the lot, and the...
https://apnews.com/article/delta-explosion-kills-two-workers-atlanta-georgia-978d4a77652375968b7000c8dee0ca7f
I would have thought this would be during inflation bead seating while not in a cage, but the article says it was during disassembly. Are these split rims somebody attempted to separate...
I've got a friend that uses a timesaver WET belt sander/deburr machine. It has a belt followed by a scotchbrite type drum to deburr laser cut steel and aluminum parts. Below the conveyor is a filter fabric fed from a roll through a trough with a float switch. The filter fabric is advanced...
I have a forklift with cushion type tires, which are solid urethane rubber bonded to a steel ring. The steel ring/tire assembly is normally pressed on to the wheel; the ring/wheel assembly is intact. The tire has become detached from the steel ring. The plan is to bond it back to the ring...
Dodge 3.6L v6, flex plate centers break out. The steel center is like glass. The one shown replaced the first one that failed in the same manner 4 years ago and was supposed to be an improved part. All are MOPAR OEM parts, current failure at 174k mi. The part is cheap but costs $600 in labor...
https://www.instagram.com/reel/CcZ6jx4lSo3/?igshid=MDJmNzVkMjY=
there are other camera angles out there. Hook and barge are at the bottom of the harbor...
