Greetings:
I'm new to the NX1926 version. When drafting, my centerlines come in at a 25 thickness. I would like to change this in settings, but have not been able to find it yet. Can someone help point to where we change this setting?
Thanks,
Brent
Greetings:
In NX 12 and prior, I was able to measure the actual weight of a body. I'm not sure where to find this command in the latest version. Can someone help point the way?
Thanks,
Brent
Greetings:
I have a part nested into a fixture. I took a section view of the round assembly. When I go to dimension the fixture and the part, the dimension will not allow me to select say an endpoint on my part. I use to grab endpoints from components without issue in NX12 and earlier. I...
Greetings,
From NX12 and prior, I was always able to create a hole, either threaded or whatever, from a projected circle or even from the bottom of a clearance hole of a body that was directly on top of another body. Now when I attempt either of those in NX 1926, after clicking the hole...
Greetings,
We are now using NX 1926, we used to use NX12 and prior. I am currently attempting to project a curve from an imported .prt file. It seems to make that part file the current work feature (the one I need lines from), then when I go back to work on Displayed Assembly, the curves go...
Greetings:
I am currently drafting a part from a previous file and when I rapid dimension, I have the settings set for (3) decimal places. Some of the DIMs show up as 3, some 2 and some 1. I have set my preferences accordingly. When I double click a single decimal dimension, it shows it set...
Greetings:
In NX12, when drafting, I am able to type the letter "L" and this begins sketch mode with the line command. In NX 1926, when I type the letter "L", nothing occurs. I have to find the line command in the sketch application to perform this. I'm wondering if there is a toggle...
Greetings:
We have recently upgraded from NX12 to the latest version of NX. In NX12, for example, when I would be in model application, I could hover over any part of the model and wait for 3 dots to appear, which gave me the option to click and select from a list of items. In the latest...
Greetings:
I have version NX 1926 Series. When placing a dimension for a hold, the diameter symbol is far from the number it represents. I'm wondering if there is a setting that can be changed to modify this gap?
Thanks,
Brent
Greetings:
I am designing in NX12. Our customer requires 2-D AutoCAD. I know how to export to AutoCAD and properly scale and all of that; however, the AutoCAD file has to be cleaned up quite a bit. For example, angle dimensions change positions, so these require re-dimensioning, which isn't...
Greetings:
I am drafting a base plate and has (6) angled flats within it. These flats have holes that need called out, which requires a view normal to this surface. I am unable to figure out how to do that with my section view, I think due to it being a section view. Would anyone know if...
Greetings,
Does anyone know if UG has the option to place 2-D Label Matrix on a plane or surface? And then that data can be used for machining?
Thanks,
Brent
Greetings:
I have a borrowed file that is layered. When I try to shut a layer off, I notice in the tree, the body ghosts out, but the image on the screen stays shown. I would like the image to disappear when I turn its layer off. Can someone advise where I find the settings for this...
Greetings:
I have an issue with opening NX12 new, and my settings do not stay intact. Specifically, in sketch mode, I would like to turn Auto Dimension off. When I open a new instance, this box always comes checked. Can someone help me create a role that keeps all my settings?
Thanks,
Brent
Greetings:
I have a simple square extrusion, 1.50 Thick x 24 x 24. I've placed several threaded holes thru this plate, various sizes and quantities. Very simple plate with holes thru it, and when I go to drafting and try utilizing the hole table, the hole table asks for the origin, the left...
Greetings:
I've used a dimension reference in NX11 before in order to dimension a formula utilizing the dimension. I am now in NX12 and it seems different. Can someone help me with how to create a dimension that holds and can be used to dimension within a sketch in NX12?
Thanks,
Brent
Greetings:
I have recently began using NX12. When I add a button to my top border bar, it stays there until I shut down for the evening. When I start the next day, the buttons that I added are gone. How do I keep buttons that I add?
Thanks,
Brent
Greetings:
I have a design where I'm drafting a component and all lines and text are visible. When I go to print, all lines including the dimension lines show, but the text does not show. Can someone help me with this issue?
Thanks,
Brent
Greetings:
I have a file with a good model; however, the title blocks in the drafting are not what I would like to have. I have a separate file with a title block that I would like to have in the other file with the model. Is there a way to copy a title block from one file to the other file...
Greetings:
We have a sketch on the face of a body. We need a portion of the sketch to be relative to the body. Is it possible to write a formula in a dimension that changes if the body changes?
Thanks,
Brent
