I am learning about SWIMM5, I am used to working with a rainfall distribution and IDF rainfall curves.It appears that SWIMM will accept unform inches/24hours of actual rainfall data. I need to add a Foridia modified SCS type II rainfall distribution to the program. Can this be done?
I am trying to find the formula to convert lumens at the street light to effective lumins at the street at varying distances from the light standard. Also, does anyone have any common sense standards for spacing of street lights within a subdivision?
We are trying to set up a system of monitoring station in the County to monitor rainfall and stream levels and transmit the data back to a central computer by radio. Any suggestions?
I am working on a ICPR model and the results indicate that the 5,10 and 25 year runoffs all produce peak elevation stage in the downstream boundary equal to the peak stage set in the downstream boundary. What is the significance of this?
We are revising our land developemt ordinance and are interested in studying different methods for determining when a left turn or right turn lane into a residential development is warrented.Can anyone offer suggestions
I am working on a project where the normal water level of a detetnion pond is lower than the existing water table by about three feet. I need to compute the amount of water that will flow into the pond from the ground water. Any ideas?
I am working of a design where the detention pond normal water elevation is lower than the groundwater table and would like some advise on the best way to compute the amount of groundwater that will enter the pond. The water tabel is about 3 feet higher that the normal water level in the pond
I'm involved in a project in Northeast Florida where it is proposed to design a detention pond with the normal water surface about 2 feet below the water table. It will have a weir at the design normal water level and it is intended to drain all of the water table above the design normal water...
My office is thinking about obtaining a copy of the ICPR storm water routing program. I am trying to locate a copy of the user manual,so as to review it and determine if this program is desirable. The company tells me that they cannot send or sell a copy of the manual, but that we must buy the...
I have moved from Denver to Jacksonville, Florida. In Colorado, I used the FAA method of computing detention basin volumes. I would like to use the same method in Florida but cannot find the three" C" factors for Jacksonville. Can anyone point me to a surce.
I need to upgrade the design of a treatment plant in Arizona, but the state does not have any specific design requirements. I need to locate specific design guidelines such as the " ten state standards" or regs in nearby states. Can anybody give a websight?
I plan to puchase a new modeling program in the near future and am considering buying H2OMAP.I would be interested in any comments from other modelers on this program or other programs. Also is there price too high are in line with other programs.
I recently talked to a salesman and he said that the variable speeds units that control the electic power were very effective and didn't cost that much. The last variable speed pump I designed was in 1988 and it was a diaster. Could I have comments from other engineers with their opinions on the...
I an working with the EPNET program to develop a model for a sustem with severl sewage pump stations dicharging into interconnecting force mains. Has anyone used this system for this purpose? If so,do you have any tips? Has anyone used a better program for thsi pupose?
I am working a flow model for a group of pump stations and interconnecting force mains. Currently I am using the EPANET water main modeling propgram. Does anyone have experience in this field, and has anyting used EPANET or another program for this purpose? If so can you give me tips?
I am designing a project in North Florida with a detention basin that also includes water quality treatment.However, I would like more fill from the pond than the 12 feet allowed. This depth limit is imposed to prevent metal and other contaminates from being sucked up from the bottom. My...
