Recent content by t2b

Draw an ARC 181 degree and the arc length dimension leader line look good- radiating from the centre. Draw an ARC 179 degree and the arc length dimension leader line look bad- horizontal to the end points. Is it possible to maintain radial leader lines for all angles?

ANY EASY WAYS TO MEASURE CHAIN & BELT LENGTHS- OTHER THAN EXPORT TO AUTOCAD! THANKS

HOW DO YOU ADD A NEW PRINTER TO WILDFIRE 3. THANKS

WHEN USING THE FIND SET THE OPTIONS TO "Component or Feature" & ENTER YOUR NO. IN THE "VALUE" BOX.

IS THERE A WAY TO PUT PROE MODELS ON GOOGLE EARTH? I'D LIKE TO SHARE MODELS WITH CUSTOMERS WHO ARE 'COMPUTER ILLITERATE'- THINKING GOOGLE EARTH MIGHT HELP. I KNOW EDRAWINGS WERE SELF EXTRACTING IN THE EARLY DAYS BUT THE NEW VERSIONS NEED BUYING FOR THIS FEATURE.

THANKS- IN THE MEAN TIME I SET UP A MAPKEY- IT'S ENTERTAINING- AFTER PRESSING THE BUTTON ALL THE COLOUR SLIDERS MOVE THROUGH COLOURS I PONDERED BEFORE SETTLING ON THE FINAL SCHEME.

I'VE SET: TOOLS>OPTIONS>system_background_color 192 206 190 "system_background_color 192 206 190" THIS LINE APPEARS IN BOTH CONFIG & CURRENT_SESSION FILES. AFTER RESTARTING I'M STILL LEFT WITH A GREY BACKGROUND NOT LIMEISH GREEN- ANY IDEAS? THANKS

TRYING TO SHRINKWRAP LARGE ASSEMBLIES ON LEVEL 1 PRODUCES A LARGE RECTANGLULAR BOX, ON LEVEL 9 & 10 THIS PENTIUM 4 RUNS AT 100% CPU FOR 1-2 HOURS THEN USUALLY CRASHES. WHAT WILL HELP WHEN WORKING WITH LARGE ASS'S?

YES- ALL SUB ASSEMBLY PARTS TO BE RENUMBERED AS THE ASSEMBLY UNDER THE NEW WORKS ORDER NO. THE LATEST IDEA IS TO OPEN PROE FILES AS A "BINARY" FILE TYPES AND USE A VISUAL BASIC ROUTINE TO ALTER THE NUMBERS. SAVING THE DRAWINGS WITHIN DDM AND MAINTAINING A LINK TO THE MODEL COULD BE A PROBLEM -WE...

WE ARE LOOKING FOR A WAY TO RENUMBER DRAWINGS. WE USE "DESIGN DATA MANAGER" AND A 12345-67890 NUMBERING SYSTEM WHERE 12345 IS THE WORKS ORDER NO. AND 67890 THE PART/ASSEMBLY DRAWINGS. WHEN WE WANT TO REISSUE AN OLD ASSEMBLY WITH A NEW WORKS ORDER NO. ALL THE PARTS & DRAWINGS ARE RENUMBERED BY...

Proe locks up when printing for 1 min whilst spooling when a print is sent to the HP A3 printer. Send a print to the HP plotter- no problem. why is proe locking up and what can i try to free it- if the spooling takes 1 min then i'll wait for the print- at least if proe free's up i can carry on...

I'VE FOUND THIS WITHIN HELP BUT DON'T KNOW HOW TO ALTER PARAMETERS- ANY SUGGESTIONS? "To override smart default crosshatch for newly created cross sections, define cross section parameters default_xhatch_spacing and default_xhatch_angle. Cross sections of other surrounding parts that are not...

THANKS A COLLEAGUE IS HATCHING A FLOOR OF FIRE BRICKS FOR A FURNACE (WILDFIRE 3), USING THE METHOD YOU HAVE DECSCRIBED AND HAS ROUGHLY TAKEN 2 DAYS.

THE AUTOMATIC HATCHING THROWS LINES ON HERE & THERE. HOW CAN IT BE CONTROLLED I.E ALL LINES TO BE AT 135 DEGREE & 45 DEGREE THEN VARY THE LINE SPACES. (& COMMON PARTS TO SHARE THE SAME HATCH). IN ADDITION TO THIS CAN THE HATCHING BE GROUPED SO HYDRAULIC, MECHANICAL, ELECTRICAL & PNEUMATIC PARTS...

Thanks My set up does not have the mechanism license- is it still possible have moving parts?