Ivymike,
Take the formula you stated in your first post.
"CR.dyn = (Vol.tdc + Vol.IVC_swept) / Vol.tdc"
This is great, but prior to the piston making it to TDC the spark plug will fire. At that point, you not only have the piston compressing the gas, but the now burning and rapidly...
My question is, we light the charge off prior to TDC, why do we pretend (in our calculations) that this doesn't happen? "Real" pre-combustion-compression ends when the spark plug fires. The longer you wait, the more compression you have. Naturally there is a compromise point, but that...
Try this,
Mean piston speed in feet per second = 2 * desired peak torque RPM * stroke in feet / 60.
Assume valve throat diameter 87% of valve head diameter and figure the respective cross sectional area.
Then, Mean port velocity in feet per second = piston area in square feet / valve throat...
Here is how I visualize it.
Tire wants to go forward in a hurry.
Chassis has massive, inertial-based reasons to stay still.
If the tire moves forward in squat, it will allow the tire to move forward to an extent, while the chassis stays still (to an extent).
If the tire moves backwards in...
Move the roll center 2 feet to the left of the left front tire in a left turn and both front springs will be in compression.
Conversely, if we move the roll center 2 feet to the right of the right front tire in a left turn, we will have both springs in extension as the car attempts to trip over...
The more the rear tires move rearward as the chassis squats, the more anti-squat you have. You will do this by pointing the pivot axis (in side view) upward at the front. You will have to be careful however, to make sure the radius arms do not pull the wheels forward as the car squats. They will...
TiN is used on Titanium valves so that the stems will not gall the guides. Some manufactures use this process while others use a ceramic coating. You can not run Titanium valves without some kind of coating or the stems will gall very quickly. Titanium is also very notch sensitive, so that will...
Marquis,
I think it's SAAB that's doing the exhaust gas reversion technology, correct? Have other OEM's jumped on the bandwagon to your knowledge?
While not all of my research has been along the following lines concerning the quenching off of the inlet side, some of it has.
One very well...
You won't have to worry about "shock waves!" There are numerous examples of engines running two plugs per cylinder and I have never heard of them having such a problem. Nearly all light aircraft engines use two plugs per cylinder and dual magnetos. When you switch between mags on a...
The following are my beliefs only, based on more theoretical knowledge than first-hand factual experience.
1) There is no one magic bullet to economy. For more, see the tornado swirling device thread of a month ago.
2) Economy is about combustion efficiency and the transference of this force...
Marquis,
Do you find BSAC more important that BSFC, or do you use them in conjunction for a more accurate picture of thermal efficiency? How would either be analyzed in part or as a group?
Sean
Marquis,
Would you please send me an E-mail? I'd be interested in learning more about your work. a_racerr@hotmail.com
You said it when you stated the 'virtues' of the Siamese inlet port! I've had some experience with these and I can attest to the poor flow quality inherent with their design...
