Recent content by successwale

Can somebody tell me what might cause feedback voltage less than 1V which also leads to throttle valve position fault in TCG2020 MWM engine . How to rectify this?

Please am running an engine MWM, Whenever i want to start the engine it keeps displaying DZR TDC SENSOR ERROR FAULT, Wht could be the causes of this error

Please am running an engine MWM, Whenever i want to start the engine it keeps displaying DZR TDC SENSOR ERROR FAULT, Wht could be the causes of this error

Please am running an engine MWM, Whenever i want to start the engine it keeps displaying DZR TDC SENSOR ERROR FAULT, Wht could be the causes of this error

The engine has been running for past 4 years without problem.

What might be causes of differential current on generator multi differential relay protection unit of MV panel. once the generator synchronized, carry a few a KW load it shutdown the engine on differential current on GPU.

standing trip?i do not really get it,explain further please.

What might cause the TAVRIDA Vacuum Circuit Breaker 630A when closed, it opens back?

how do i do that? is there any thing to set on the panel?

I am running a deutz gas engine of 1MW ,the engine do shutdown on OVERCURRENT, what can i do to rectify this fault?

This fault was experience last week and last year,but last year the outgoing breaker 2MVA do tripped on PHASE FAULT and engine would'nt shutdown.

I reset the fault on SEPAM SCHNEIDER panel.This fault has happen 3 times last week.i could not check the cable gland due to demand from our customer.

I'm running 3.5MW deutz gas engine of which the outgoing breaker 2MVA always trips on PHASE FAULT and EARTH FAULT. I don't know what i can do ensure this did not repeat it self. please could be the sepam setting causing this?

What could cause a 11KV HV cct breaker to indicate UNBALANCE1 on sepam?

yes,the unit is tripping?