Hi Gents,
Thank you for all your replies.
Point 1 , I will go see a laywer.
The spesific client that came to me also contacted me privately while i was still with the company. At that point they gave me the option. Join them in a personal capacity or arrange consulting via my previous firm. I...
I have attached the second document here
--Off all the things i've lost , i miss my mind the most--http://files.engineering.com/getfile.aspx?folder=68eaeb13-25c7-47ef-a7d0-8e89a6cf0985&file=restraint2.png
Hi gents,
I need some insight into a contract i have with my previous company in which i was a shareholder.
Some background i started the company a few years ago and took on other shareholders. In this time our relationships broke down within the company and i resigned as a shareholder...
Fond the solution,Open image in word and then copy from Word to AutoCAD.
Thanks for your help
R
--Off all the things i've lost , i miss my mind the most--
Hi Friends,
I have a pronblem putting a logo on our drawing frames. When i put the logo and email it only shows the path from where i loaded the logo. How do i embed the logo so when i mail it the person receiving it can see the logo,
Many thanks in advance
--Off all the things i've lost , i...
Hi guys, i'm looking for software where you can build circuits which then calculate current voltages ect.
Mostly Low Voltage 24VDC ect.
Anybody know a good source for this.
Thanks
--Off all the things i've lost , i miss my mind the most--
HI Don,
I'll give you a star 4 this one, tell me what were the estimated cots involved??
Regards
Rheinhardt
--Off all the things i've lost , i miss my mind the most--
The purpose of the robot while being included into a production line is not that Master as Tygerdawg and Steve mentioned..
Although it has the option of additional IO points and logic coding the purpose for which it was built is not to control conveyer systems...
Few of the maintenance staff...
Dear Senslessticker
I am in a verysimilar situation to yours, we are not a huge company but have about 100 staff members or so.. Its not so hard to imagine that your actual work done at times goes far beyond a persons job description..
When i started with the company my salary was below...
I work for a company that does robot cell applications and we use these robots all ovver for companies like BMW, Coca Cola ect.. The point is i have seen production lines in Germany that are operated by 2 people and a similar line in South Africa operated by 50... It will definitely sort out...
HI jw62,
Very easy it means that there is a difference between the timestamp of the actual Function Block to when u created the call for the function..
Just goto "File" tab and select "Check and update acceses"
Make sure afterwards that you save the block and download it off course.. Even a...
CJCPE,jraef
Thank you for your replies, i hav found the problem to be on the external dynamic breaking kit, the external chopper circuit is the problem, the supplier never remove it..
Thanks again
--Off all the things i've lost , i miss my mind the most--
Dear Friends,
I have the following situation which I find very strange with an ABB VSD that we are using on a hoist. The situation is as follows the hoist basically stacks plates into different bays..
Now the VSD that control the hoist motor was actually working fine till the following...
I have done the following....
The specific heat of water is 1 calorie/gram °C = 4.186 joule/gram °C == 4186 j/kg °C
Q=c*m*deltaT
c = 4186 j/kg°C
m = 1000kg = 1000l = 1m³ of water
deltaT = 60°C-12°C >> I have an error in first post it is 60°C deltaT=48°C
Q=200.928 Million Joules
Since a...
