Hello,
Do you need to change the revision of a part if the only thing to change on the drawing is the item description?
Nothing changed except for what we call it internally.
Thanks,
Reg
I have a customer that is looking at using AGM batteries to run heavy equipment on their truck. The AGM batteries would be in a remote box about 20 ft from the starting batteries and connected to the starting batteries with #1 wire for charging from the truck alternator (No battery isolator)...
This reply may be too late. I have used a series hydraulic circuit to achieve syncronized cylinder in a few applications. Rod area of cylinder 1 is equal to the pistom area of cylinder 2. cyl 1 and cyl 2 are connected rod port to piston port (series). As cyl 1 extents it pushes the oil in...
Hello,
I'm looking for any suggestions for suppliers for torsion bars.
Our spec is 1/2" bar - 80" long.
Current material spec is EN47 Bright drawn steel.
Finish: HEATED TO 930C FOR 15 MIN, OIL QUENCHED AND TEMPERED @ 480C FOR 60 MIN.
429-461 BRINELL (3000lb, 10 DIA, 2.85-2.95 INDENT)...
