My two bit suggestion...
Try a USB6007 from NI (National Instruments). This is a device which is coupled to a 3-wire pressure transducer (either voltage or 4-20ma current mode) and the USB of a laptop with their data logging s/w (free with this purchase.). This is mainly a cheap Data-logging...
MRASHID
Ar you still interested in understanding this circuit. Perhaps I could be of help. If one looks at the circuit, one can understand that injection is accomplished with a twin cylinder actuation, meaning that injection takes place by pressurising the rod-side of the cylinders in tandem...
Perhaps if you remove the Y60, below the P port of the valve in the manifold block you may see a small throttle of dia 1.5mm. Please clean the same and re-assemble and your machine would be as good as new
This is a modification of the lisp program given by "pardal"
This can draw a polygon of any number of equal sides, calculate its enclosed area and its perimeter.
; Program for drawing polygon of any number of sides (greater than 2 of course),
; given the length of each side, the...
duck0601
The diesel formula should really be
(substr (getvar "dwgname") 1 4)
Just copy the above to the command line of Autocad and execute (enter button). This should return with the first four characters of the drawing name.
Hope this satisfies you
MPSAJU
