Recent content by mooimooi

Hi Charn24050, Yes I think that would be a smashing idea if it works! Just need more info on the system. Do you use B/W or color CCTV system? and how do you trigger the mechanism of flash when the two photos mismatch?. Sorry I may be asking some dumb questions, as I have not used such systems...

Hi Nbucska, I see the point of using a color that is opaque to the board, but i do not understand the your calculations, ie the 40Khz and 2500/4870 , and 6600 cycles. Would appreciate if you could explain in simpler terms. My knowledge of optical physics is quite bad.. Thanks.

Hi Steve Owens, We are running mass pro around 5k boards per day and i do not think it is possible to subject all of them into this accelarated environmental test methods, as this is introducing another process in the process plan and moreover my hookup wires in the pcba cannot withstand more...

Hi all, When i review all the valuble inputs from all of you, i conclude this is problem is quite a tough nut to crack. I must admit that electrical testing might not be the "catch all" for this kind of problem. I think visual inspection might be the best solution, as susggested by...

Hi Melone, Thanks for the quick response. I agree with you this Temp cyle test is probably the most effective test method for weeding out such kind of defects. But our volume does not justify the purchase of a TC chamber. I was looking for some kind of simple electrical test circuits that might...

Hi there! Need a bit of some guidance from pcba assly gurus; You see, I have double sided pcb and on this i mount only the following components. a) resistors - 3 pieces , total 6 solder points. b) Photo interruptors - 3 pieces, total 12 points. c) Hook up wires - 12 points In total I have 30...

Hey guys, All of you have been so wonderful in providing me plenty of options to go by. Thanks for the great illumination. Joy to you Mooimooi

Hi DSPdad, Thank you for the explanation, that was very useful. Joy to you.

Hi, Just curious to know why most motor brake and clutch coils are mostly designed or rated in DC voltage and not in AC. In the case of ordinary relays used for control purposes, they can either be constructed in AC or DC. Thanks Chandran.

Hi all. Thanks for your valuble inputs, probably converting the 3 phase inputs would be easier than single phase as mentioned by "logbook". Thanks old chap. Joy to you.

Hi, This is to power the utilities of an old boat that uses 240vdc inputs when the boat docks Thanks

To all. I thank all of you for your contribution. I must say that I have gained very useful information from your excellent feedback. Thanks and Joy to you.

Hi Ziet, Thanks for the fast response. Is there any other options available? Thanks

Hi , I have 240VAC mains and i need to get this converted to 240 VDC at 60A. Is it possible to just use the high power rectifier diodes constructed in a bridge array, with just one electrolytic capacitor. Thanks

Hi I need to convert a DC 200V supply to 24VDC,10 to 15 Amps for battery charging purposes in a boat. Is there any commercially available converters available? WOuld appreciate also if anyone can provide me a schematic to build one. Thanks in advance..