Protocol difference was brought up by the manufacturer tech support. But as you mentioned, if the cat6a has a larger phase difference then that could be a problem?
Thank you John!
Cat6A does have a better performance however, that's mainly concerned with ethernet, when it comes to video signal which has a different communication protocol that can't necessarily be concluded and the latency caused by different pairs of wire could cause color disruption in...
Hi,
For a project in my hospital I need to use several video and KVM splitter/extenders for remote displays. Most of the products that I find are designed for Cat5e or Cat6 cables. The problem is that all the infrastructure in our new facility is Cat6A cable.
I'm wondering if anyone has had any...
Hi,
My question is more of an IT infrastructure one but since I couldn't find a more relevant forum I thought I post it here. So here is it is:
I am a clinical engineer in a Hospital and currently we are designing new Biomed Data closets (Similar to tel/data closets) for a new building. These...
Hi,
I was wondering if anyone could help me out with a FT analysis that I am currently conducting.
My question is that in the tree if I have the basic events Failure Rates(#failure/10^6 hrs) instead of the Failure probability and that is the only information I have from my component(basic...
Hi,
Just wondering if anyone has any idea where I can find some usefull (free) tutorials on COSMOSMOTION 2008. I need to use it to simulate dynamics of a device I'm testing.
One more question now that I'm making this thread, again in COSMOSMOTION, in the rotary motors there are 4 or 5 options...
Hi,
Just wondering if anyone has any idea where I can find some usefull (free) tutorials on COSMOSMOTION 2008. I need to use it to simulate dynamics of a device I'm testing.
One more question now that I'm making this thread, again in COSMOSMOTION, in the rotary motors there are 4 or 5 options...
I am designing the required safety tests for the lift according to CSA. The tests are not going be done on people, we are using sandbags as weights. There are so many tests to be passed before any human trial.
Hi KENAT,
I have all the properties of my metal such as tensile strength and so on. The plate is fully supported at both ends and it has an angle of 10 degs. Can you name one those textbooks please?
Thanks,
Mohammad
Hi,
I am in the process of testing a very heavy mechanical patient lift. The lift has to be placed on the surface of a sloped metal plate. The weight of my lift(load) is known (~ 1040 kg). The metal plate that i will be using is a carbon steel plate with the dimensions of 96"X60", but I am not...
