OK, here's the thing. You won't get any options with a right click on your user defined parameters if those parameters are using dimension names that you have defined yourself.
So let's say you have a box with a length and width dimension called 'length' and 'width' and you have a parameter...
Ordinate is fine in some situations... But don't forget that sometimes your drawing will have a standard tolerance for dimensions over a certain length and you can really screw up your part by dimensioning that way if you're not careful.
I think ordinate dimensioning is fine if you have a...
Here's what I would do... I would call out this surface parallel to datum A to within whatever tolerance is neccessary and then I would add a height dimension to the surface in question and add a tolerance of ±0.005 or whatever is appropriate. I don't think that I would use a profile tolerance...
I think that unless the two rev'd parts are changed in a way that modifies the form, fit, or function of the assembly or are changed in a way that they require retooling or alternate positioning within the parent assembly, that the revision of the assembly should stay the same.
Look at it this...
If you're drawing is going to be used to aid assembly than I've found in the past that a brief description of the part (as in option #1) is best. But there is nothing wrong with option #2 and I would probably pick that one if I was doing a drawing that manufacturing, assy, and inspection people...
ewh,
I believe he's saying that if you've got a thru hole that is partially threaded that you need some indication of the depth of the thread even though the picture might show a thru hole... In which case he's correct.
The way I always did my drawings was like this. First you try to fully describe the part with the views only. Than you add dimensions, notes, tolerances, etc., to further describe the part until it is completely understood.
For instance. I would typically show a view with hidden lines to show a...
I just did a survey of about 3000 Inventor part files and the majority of them were under 700k... Below is the breakdown... The file size range with the least number of files will come first followed by second smallest and so on. Of course this could be heavily influenced by the type of parts we...
Attach a leader to one of the four radii, pull the dimension off of the part, and include the text below.
4X R.25
The only time a dimension should be on or inside a part is when you don't have any other option.
Hi,
Just wondering if anyone has any interesting ideas for backround images in Inventor while modeling/drafting... I've been using one of the canned cloud images as kind of a joke at my office, but honestly I'd like to find some cool bitmaps... Something simple, but something with a technical...
