Thanks drfraust for the reply[smile]. But the thing is I have used the model (shown in the first post) and created a set of data points. So for the next stage for consistency in my fluid analysis results, I have to use the same model and modify it as it is very difficult to recreate it exactly...
Here is the turbine inside the cylinder before the Cut-out in the assembly.http://files.engineering.com/getfile.aspx?folder=e144bd41-bb32-41bc-be9f-a40a245e9e16&file=Assembly_turbineandcylinder.JPG
Hello there guys,
I have designed a turbine and I want to get a negative space cut-out from a cylindrical shape of similar size(The cylinder with the cut-out will act as a fluid body to be used for analysis in Fluent).
What I do is first make a 3D model as Pro E part then I export it to a Pro...
Thanks for the replies guys!!
The attached file is the shoulder/chest level layer of a data plot of 3D scan of a human body. The task is to auto detect the arm pits and the crotch area. So in the attached file when we move down from top, the sharp angles will grow towards each other and finally...
Hi all,
I am new to Matlab and i am stuck in this problem.
(File attached for reference)
I have a set of points (coplanar) which makes a shape and encloses onto itself. I want to run loop which finds the inside angle between three points and give me back the results. All the contours I have...
The above is a good program but it does not serve my purpose. Even if there are hundreds of points in the plane and just three points on the inside, it should be able to detect and draw the incircle through those three points(please dont be alarmed, my data is not absolutely random. it is...
I have a 3D model(resembling to cylinder but does not have a smooth surface) and want to fit a circle(on x&y axis) INSIDE it at some intervals(z axis). and i want to get the radius of the circle as a result at each interval. Does anyone know a file tht does it?
I am using Geomagic Studio11. Yes you are right. The model I scanned is hollow from inside. Is there any way I can make it solid/fill it in Pro-E/Geomagic or any other software? If the above is not possible can I find the area enclosed by any other software?
I have transferred a model of a body scan from Geomagic to Pro-E in a DXF format. I want to calculate the cross sectional area of the model at various points on the z-axis. I am trying to execute the method under topic "Example: Analyzing the Cross Section of a Pipe" but cant get through step...
