Recent content by lombardo

sorry, increase octane (Energy savings)

I want to know if already exist a good additive (combustion improver) for natural gas, I also want to Know if its posible to add a liquid additive to a gas combustible. Thanks Alejandro

I want to run a test with a low coeficient of friccion synthetic lubricant in a screw air compressor, the problem I have is that the neumatic demand in the process is not regular, so in order to run an realible test I want to addapt an air flow collector, in this way I will know how many energy...

Im looking for some lubricant that meets this Mil Norm (PRF 3150) somebody know the comercial name of this kind of lubricant in Mobil or Exxon brand? or some alternative easy to find in Mexico that meets this Norm. Thanks Alejandro Peterson

Hi, I´m looking for a fire resistant hydraulic fluid such as the Skydrol LD4, do you know another alternative that meets the MIL 0646 requirements, I need to have more alternatives not only the solutia Skydrol? Thanks in advance Alejandro Peterson

could you explain me??

Really Really apreciate your help guys, I read a couple of thechnical sheets of heat transfer fluids and all the shhets said "this product save energy because the higher specific heat and the greater thermal conductivity that means low energy costs (low diesel comsuption) but wwhat I do not...

Thanks TD2K, Thanks a lot for your prompt response, You mean a low specific heat fluid need to be circulating faster than a high specific heat fluid in order to mantain the same temperature, but the higher specific heat fluid need more heat in order to increase its temperature 8 that means to...

I want to calculate energy savings with a high performance heat transfer fluid. This fluid have 50% better thermal conductivity but the specific heat is almost the same compared with the actual lubricant I use, so my questions are: how can I calculate the savings if the thermal conductivity of...

Thanks itsmoked, So I can´t meassure the savings with my ampers collector?

Thanks a lot ccjercey, I really apreciate your support, as you can see electrical is not my area and your support is very very important, one more question is where can I get the power factor of this equipment? or that power factor mean in order to use your posted formula.

thanks for the answers, The formula posted requiere the current but my equipment collect potency (amperage), so I want to know if I can convert to kwh this savings, Thanks a lot for your responses , are very helpfull for me

Thanks skogsgurra. I can collect the amperage per phase the thime I select with an equipment called pace data logger. I found in a lubricant magazine article this info. documenting energy savings (nergy savings 2.2 amp) all figures are based on 24 hour/day at 365 days/year volts x 3 x service...

I want to run a test in order to verify energy savings related with a high performance oil in a recip compressor, I have an equiptment to meassure amperage but I want to know how to transform the amps to kilowatts/hour in order to know how much money I`ll save. Thanks

I have a question, I have a 100 hp Mycom mayekawa reciprocant compresor and the used refrigerant is freon R22, the technical data sheet of the oil said the viscosity is 56 cSt@100ºF, but when I sent the lubricant for analisys always the viscosity is minor, 43 to 45 cSt, I already sent a new...