Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by lateapex

  1. lateapex

    4-post test rig for damper setup

    There's some good info here: http://insideracingtechnology.com/o7postshkr.htm
  2. lateapex

    Camber and tire wear problem

    Thanks for looking.. What's your operating toe? (wear) .060 per wheel toe-out at the front, and .060-.100 per wheel toe-in at the rear. I don't think that's anything too wacky. I can't be certain, but I think the inside shoulder wear might have gotten better with the increased toe at the...
  3. lateapex

    Camber and tire wear problem

    Hi all, I'm running an open-wheel formula car, on GY 160 bias-ply slicks. I am having a problem with graining and wear on the inner portion of my front and rear tires. When I get to Watkins Glen, and using say 1.5 deg front and ¾ deg rear static camber, the inside edges of my tires grain...
See more

Part and Inventory Search

Back
Top Bottom