Anybody knows the best procedure for Bystar 5200 to shutdown safety the laser when the computer is faulty and it doesn’t respond to any command not even when we turn off and we start the computer.
I call the Bystronic and they will send a technician to look at the computer but mean time I...
Adjust the lead in if is possible and depends of the laser machine -modify the laser piercing power and gas pressure. Something what I do if none of this is working is I spray the sheet with welder anti spatter solution and for as everything is working perfect
Whit lens failure kit you save a lot of down time. Plus is more safe for the optics . When I have a reflecting beam the machine stops and I clear the alarm I check the lens and I start cutting. I cut thick SS (6,8,10,12) and aluminium up to 5 mm and the upgrade was very good for us. Thanks
Sorry the green/red led was on the old tip of linear measuring system I misunderstood about your upgrading.
At the end of last year the bystronic technician upgrade the lens failure kit and the linear measuring system and we had no problem since then.
The problem could be in the CNC rack...
Is best to clean very good the linear measuring system on the X and Y axes whit a dry cotton cloth at least once a week .
I have the same problem and it was cleared. Sometimes after finishing the nozzle calibration it was missing the next hole or even the contour of the part. About the holes...
Does anyone have books about errors/alarms and maintenance for BYSTRONIC BYSPEED and BYSTAR.I start a new job and I dont have the books. PLEASE HELP ME
