Recent content by kmpillai

Hi Friends What are all parameters limit the size of the gasoline engine engine cylinder? Upto what power levels single cylinder engine can be developed? Thanks KMP

Hi, How the profile of the gerotor is obatined. I read that it is standard geometric equations. Anybody know these equations for geeting the x, y co-ordiantes KMP

Hi, An IC engine is running with a propeller. Is there any way to estimate the power output of the engine from the thrust and rpm. KMP

Hi, Type the numbers in the cells and select the cells. Go to "format cells" option and select the "number". Right side entert the number of decimal places to display (default it will show 2. You can increase or decrease. Before formating 100.23 100.24567 100.278 100 After formating for 3...

Aluminium-Silicon alloy is good candidate KMP

Make the number format as follows 32.400 412.320 0.354 The decimal points will be aligned now. I don't know whether this will solve your problem. KMP

Mr Patprimmer, Thanks for your reply. Could you please elaborate on this, how it will be harmful to the engine. KMP

Hi all, If somebody running an 4 stroke engine without thermostat, will it harmeful to the engine. KMP

Hi, Normally 3 to 12 fps is used for Water 100 to 200 fps for steam in the power in the industry. KMP

Hi, Please enter in in the f13 cell as follows =f12^(1/3) You will get the answer. KMP

Hi all, I am having a small Positive dispalcement lubricating oil pump with 2 outlets, one is a return line (connected to the tank) and other is connected to the part to be lubricated. I would like to control the flow of this line from 25 % to 100 % at constant speed. Kindly advice. Advance...

Hi Mr Moonshadowone, At 2000 rpm number of induction strokes are 1000 for a 4 stroke engine. (No. of induction strokes = RPM/2). Please clarify the follwoing points for answering your question. 1. what is the gas comoing out from the water cell. 2. What is HHO Regards KMP

Hi Friends, In the propeller specification the diameter and pitch is given. What is the pitch of a propeller? and how it can be measured? KMP

Hi friends, How to select a electric starter for a given petrol engine? Thanks KMP

Hi Mr Pat, I couldn't follow your answer. KMP