Can/will anyone forward the *.ies data file(s) for the lighting tables for the specialized street lighting bulbs that JEA (Jacksonville Electric Authority) stocks. Specifically I need the *.ies file for the "JEA L2 200watt HPS Cobra" bulb.
http://www.kcesco.com
http://www.kcesco.com/jaxrain.html
Uses Rational Method and average cross section of pond.
An underground infiltration system would have about 45% voids, so would have to reduce average X-section accordingly.
http://www.kcesco.com
There are also supposed to be standard or calibrated UH curves for PF of 256 and 323. Can anyone provide these or tell me a way (other than purchasing certain proprietary computer programs) that I can obtain them?
http://www.kcesco.com
If you know your rainfall depths(or have an IDF curve, or equation for your area, to figure the depths with) you can use a simplified Modifed Rational Method for your stormwater pond. Check this web site out:
http://www.kcesco.com/jaxrain.html
http://www.kesco.sphosting.com
The pond should hold at a minimum the difference between the pre- and post- discharge volumes. Usually you have to provide more because you also must include a treatment volume in addition to the mitigation volume. http://www.kesco.sphosting.com
You can get a hydraulic wheel that will help you with the
calculations. A quick Google search came up with this web site. http://www.portalsplus.com/drain_calc.htm
Hope this helps. http://www.kesco.sphosting.com
Anybody know or willing to divulge the method for determining the dimensions of Jack & Bore pits?
I hear it has something to do with the length of each section of pipe being jacked as well as the diameter and depth of the pipe, but I don't know the specifics.
