Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by j2bprometheus

  1. j2bprometheus

    Achates ?

    Hi- ACHATES claims they are partnering with Cummins for some military application: http://achatespower.com/achates-power-and-cummins-develop-leap-ahead-capability-for-the-us-army-ground-combat-fleet/ j2bprometheus
  2. j2bprometheus

    Turbocharger specifications

    mdf3443 - If the correct turbo is a Borg-Warner K27, the compressor map for the K27 says that 100 % of max turbo speed is 150 KRPM. I found a picture of the compressor map on line by searching for: Borg-Warner K27 turbo compressor map My opinion...
  3. j2bprometheus

    Transient intake manifold temperature

    StomptingGuy- My recommendation: re-run the baseline case with this one difference: make the engine displacement 20 % smaller. Predicted result: the temperature drop will be smaller and the duration shorter.
  4. j2bprometheus

    diesel exhaust heat recovery

    Regarding the "adiabatic" diesel engine that BigClive mentioned: Roy Kamo did a lot of work on this, most of it government funded. I saw him give his sales pitch once in the 1990's. He founded a little company that still does stuff related to thermal barrier coatings, etc...
  5. j2bprometheus

    Sealing in Ricardo's sleeve valve engines

    Here are some references on sleeve valve engines: White, Graham. Allied Aircraft Piston Engines of World War II: History and Development of Frontline Aircraft Piston Engines Produced by Great Britain and the United States. Society of Automotive Engineers, 1995. ISBN: 9781560916550...
  6. j2bprometheus

    Need help with reading materials

    Nashx- Which book to choose depends on what info you need. I work with engines and hence think these are helpful: Introduction to Internal Combustion Engines by Richard Stone Internal Combustion Engine Fundamentals by John B. Heywood. McGraw-Hill Book Company, New York, New York...
  7. j2bprometheus

    Cummins NT855 fuel pump adjustment

    Hi- There is some info available on the Cummins website: http://cumminsfirepower.com/Legacy-Engines.htm Scroll down a bit on the above website until you find some NT-855 engines listed. There are also some contacts listed just below that. I hope that this helps...
  8. j2bprometheus

    Reciprocating Engines running Ethane

    Enginumeer- Ethane is more resistant to autoignition than gasoline ---- compare their RON and MON numbers. So you may be able to advance the spark timing a bit and improve efficiency without getting into knock On the other hand, compressor oil autoignites very...
  9. j2bprometheus

    Starter fuels for a diesel engine

    Octane numbers for propane and butane: RON MON (RON + MON)/2 Propane: 112 97 104.5 iso-butane 102 98 100 n-butane 94 90 92 Source: Zabetakis, M. “Flammability...
  10. j2bprometheus

    Running 2008 6.4 L Super Duty PowerStroke on off-road diesel?

    Pat- Removing the DPF is illegal--- Also, the engine may have a two-way catalyst uptream of the DPF. A two-way catalyst would be poisoned by high sulfur but would probably recover after some high load operation. Re-installing the DPF is probably a hassle since things...
  11. j2bprometheus

    Toroidal Opposed Piston Engine

    Hi- This engine design is similar to some previous designs. Examples: The Tschudi engine was a spark ignition engine with four curved pistons running in a torodial track. But this was a four stroke engine, not two stroke. Also, the James two stroke opposed piston engine had pistons...
  12. j2bprometheus

    Ceramic Adiabatic Engine

    Hi- There have been several adiabatic engine projects in the past. Example: Cummins had one in the 1980's. Google this: R. Kamo W. Bryzik There are some SAE papers. Example: "Adiabatic diesel-engine technology in future transportation " by Roy Kamo...
  13. j2bprometheus

    Feuling and his engines

    dicer- The US patent office has some info. Past this into your web browser: http://patft1.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=0&p=1&f=S&l=50&Query=IN%2FFeuling&d=PTXT There is some limited info on wikipedia...
  14. j2bprometheus

    Orifice calibration

    Ibvex: from: http://www.engineeringtoolbox.com/orifice-nozzle-venturi-d_590.html References American Society of Mechanical Engineers (ASME). 2001. Measurement of fluid flow using small bore precision orifice meters. ASME MFC-14M-2001. International Organization of Standards (ISO...
  15. j2bprometheus

    Can I run an old Volvo truck (1947-1957) on palm oil

    Hi- Copper / bronze seals or sealing components are usually damaged by bio fuels. I suspect that the engine you have is equipped with seals made with copper or bronze. So expect some leaks to develop. j2bprometheus

Part and Inventory Search