We use Sharepoint within our company because it comes with Office 365, IDrive and GoogleDrive for outside sharing. I use aIDrive and my own NAS for my family.
I will try that, thanks!
I'd really like to find a command or macro that would allow the deletion of a missing plotstyle while replacing it with one that is not missing.
Or a command / macro that re-assigns plotstyles to entities, that works for nested ones like a dimension.
Chprop (select)...
I have a few drawings that do not print some dimensions correctly.
I print to PDF using styles, all layers and objects use a style called Style 1 that uses Monochrome.stb
The dimensions are on the layer Dims whose plotstyle is set for Style 1
The dimensions are on the correct layer, properties...
What is your role? Owner, installer, manufacturer, etc???
Generally a non-contact IFR proccess is similar to this:
Submit approval drawings
Pre-Construction Meeting / Job Site Safety Orientation
Tank Roundness & Plumbness Survey
Inventory, Inspection and Storage of Materials
Layout of the IFR...
The installation processs is very different between aluminum full- and non- contact IFRs.
Are you interested in which part gets installed first, or more general question of should you buy a full- or non- contact IR?
Are you going to perform a hydrotest per API 650? If you are electing to not do hydrotest API requires additional NDE and foundation capacity.
You may want to require additonal NDE if a tank failure is a high risk to the public, if your local conditions or lack of confidence in quality...
The important things are:
Always draw in Model space and dimension in Paper space
Always draw full-size full-scale in Model space
Always draw using the same units (mm, inches, angstroms, miles, etc) throughout your project
The title block in Paper space should always be drawn the actual paper...
You have to satisfy all sections of API 650 that apply to your tank, and all load cases. If section 5.9 is satisfied without additional stiffeners you have complied with that section. If you are designing an Annex V tank then you need to satisfy that Annex. If your tank needed stiffeners per...
It is not required but if the purchaser wants one it shall be done in accordance with API 650 including the thermal stress relief which does exactly as it says - heating and cooling the assembly to appropriate temperature and durations to remove residual stressed from welding.
DIK has it right. You can also enable alternate units and have both imperial and SI displayed.
Type DDIM and edit the dimstyle you are using.
You can also create a new DimStyle with the factors you want and apply that to your dimensions
