Dear Pkoestler,
The refrigeration technical units used in Italy is the "Frigorie/ora" or Frig/h.
Conversions of units are easy because 1 Frig = 1 kcal = 4,187 kJ.
The units are now largely superseeded by IS.
Frigorie units are used by old operators and maintenance people.
Best...
Hi TCrush,
First of all, see the LiBr-H2O's (h,%,t) diagrams and algorithmis on Ashrae's Handbook, Fundamentals, chap. 17.
For details see the Final Report, RP919, Secondary Properties Of Aqueous Lithium Bromide Solutions, Robert Tapscott, Murdoch University, September 1996 - June 1997, TC...
Hi ran13,
The reference books on thermal conductivity of materials are edited by Touloukian-Ho, Purdue University. See the vol. 1 and vol. 2.
Otherwise, look for trough the following gate:
http://www.mayahtt.ca/tmwiz/default.htm
Follow the instructions to come in to The Thermal Wizard where...
Hi MG74,
I agree to Ivimike and GregLocock (BTW: Goldratt and followers are strongly against the lean approach. They propose to focus the improvements on the mainly in bottle necks and not on all the flow).
I prepared a sheet/note on this subject, hoping it is useful for the forum.
Gianfranco...
Hi Umhoefer,
Thanks! I fully agree with you.
Your savvy do hope myself for the better future!
May you repeat your answer at thread404-16033?
Thanks again.
Gianfranco
PS. McLeod, you have open a lot of threads on the same subject. Now, could you summarize the answers given on others threads...
Hi Packdaddy,
For the purpose you said the correlation 8-73a, 8-74, or better 8-78, where you introduce the mu/muw parameter on Table 8-6, are enough to performe the sensitivity analysis around one working condition point (nominal).
D UA
^
|
1 -|
|
|
|
|...
Pavanje (Pav), MadMango (MM), Greg (GL),
Many thanks for your interesting replays.
Let me summarize your opinions and mine (GI) and let permit me expose a criteria to be used for setting the interchangeability of parts.
1. Two, or more "similar" parts, should have the same code or...
Wil, Semisolid,
Thanks for your advises: I bought the ASM Specialty Handbook, Aluminum and Aluminum Alloys.
Fabrizio, I appreciated very much your availability but
your E-mail address seems not correct: please, send to lopad@tin.it an E-mail. Fabrizio you have the tech. infos in the previous...
Hi Packdaddy,
Yes, if you have not the specific correlation, it is "always" correct to take into consideration the closer available correlation :-)
Did you take into account the correlation for annular spaces?
Have you decided what is the characteristic dimension: D or L?
Gianfranco
Hi ProEpro,
You could looking for in the list below.
Andy Baumen Associates, Ltd.
APCOM
Beswick Engineering Co., Inc.
Blasdel Enterprises Inc.
Bleckmann GmbH
Bomac Electric Limited
C.S.M. S.p.A.
Caloritech, Inc.
CEBI Deutschland Vertriebs GmbH
Cristal Controls Ltd.
Dalton Electric Heating Co...
Hi all,
1. In your opinion, and experience, two or more interchangeable parts should have the same code or, viceversa, different codes?
2. Which is the definition of interchangeabiliy of parts?
3. Which are the aspects that are to taking into account to settle the interchangeablity of parts...
Hi Jerre,
We assuming no ground water movements in soil (no seepage) and that the cistern is an horizontal cylinder of diameter Do and leght L, buried ad a depth = X + Do/2.
The heat flow from the cistern is:
Q = ( tw - ta ) / Rt
Where:
tw = temperature of water (average along the...
Ciao Guido,
There's a change of phase Gas -> Liquid :-)
The heat transfer coefficient greatly increases because it involves the Latent Heat of Condensation (or change phase heat).
The condensation heat transfer coefficients depend on the arrangement of the flow and orientation (horizontal...
