Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by garpike

  1. garpike

    V-shaped Cracks in Concrete Foundation Wall

    The wall bears on 8" thick by 20"~24" wide strip footing. Probably on clay. The steel beams are probably providing lateral restraint, but strangely one of the beams is approximately centered over the V-shaped crack, while the the other beam is directly over where the other crack starts. The...
  2. garpike

    V-shaped Cracks in Concrete Foundation Wall

    I came across some unusual cracks today while inspecting the unreinforced concrete foundation of a semi-detached two-story home in Eastern Ontario. The side exterior wall (on the detached side) has 4 diagonal cracks in two roughly symmetrical V-shaped patterns which begin at each end of the wall...
  3. garpike

    Robot, Risa3d or another

    So assuming by the responses, Robot isn't very popular. I guess if it isn't very popular than it can only be a mediocre at best. Thanks.
  4. garpike

    Robot, Risa3d or another

    My small firm is looking to buy some structural analysis software. In the past we've mostly dealt with temporary structures and residential, but are starting to get into buildings and other larger projects. Thus far we've done most calculations by hand, but to get into the larger projects we...

Part and Inventory Search