Recent content by francoI

Hallo guys, has anybody an experience with exporting 3Dmodel+workpoints to measurement system (Wenzel LH)? When using common exchange files no workpoints are saved. What are possibilities to properly export data?

Bruno open bill of material in assembly drawing you have prepared in advance and simply expand items with (+) signs. Then you can add baloons to individual parts. Franco

vespertilum, try to look at: http://www.cadforum.cz/cadforum_en/qaID.asp?tip=4031

This may help you to design unfoldable part: http://management.cadalyst.com/cadman/article/articleDetail.jsp?id=417388

Konstruktor, as I know generally cylindrical and conical surfaces can be unfolded only.

David, I mean one thing you have to do now is rename models. Don't use free user names ever. Instead of that use numeric or alfanumeric names linked with your projects. Vary usefull renaming helper is iAssemblyTools at www.cbliss.com/inventor/iCode/index.htm but it seems that unfortunately it...

Hi G1DESIGN it is enought for you to create notes in the inventor's notebook? francoI

Download addin "iProp Wizard" from sdotson.com and you will be quit free in inputs order and fill in preset values and so on. Many thans to Sean Dotson once again.

Hi VirgilSECARA. I think you can make it by this way. Within part environments check export of parameters you interest in(table of parameters-"fx").In assembly use derived part and check parameters only. Do it as many times as you have parts in equation. In the table of parametrs (assembly) you...

Hi everybody, we have installed INV9 recently and been annoyingly surprized by smudged texts in drawing environment. Sharpness of texts is changed by zooming. We were said it is common in INV9. Can this property be reduced or switched off.

MAGNUT45, One solution is to simply place diametr dimension at a side view. There must remain several arcs. Another one is to make section with broken cut through one hole - cylindre centre - space between holes. Then in this section the dimension is placed from the smaller dia to centre...

gib2j, we have got probably as an older Excel as '97 , haven't you. Older versions have no possibility to work with shared file.

gib2j, I am convinced you needn'd close the shared file. Just save that and other users must update this open file i.e. accept new modifications.Of course you must set file as shared in advance, beeing the first user.

gib2j, you can simply pull over marked files from Explorer into Inventor.

Supposing we use computer network it is possible to apply shared Excel file with part numbers.