any idea what items on this list would be appropriate?
http://www.thomasnet.com/prodsearch.html?cov=NA&which=prod&what=12v+electro+hydraulic+control+valve&navsec=search
thanks for the info hydromech... to be honest, i am not sure how this could be used?
The setup has a 3/8" NPT output from the pump to a 1/2" NPT inlet to the clutchpack. There is a reservoir for the fluid to feed the pump and return to.
How can this valve be plumbed in? Thanks for all your help
ok i just found the perfect pump, i am going to use a toyota electric power steering pump. Any idea what terms to do a google search on for a good regulator? If i could find an electronically controlled 0-225psi regulator with return line i would be in business :)
thanks for your help
i was really just hoping for some simple standalone device i could buy, rather than have to design. Whether it was a simple mechanical device or an electronic setup, even something like a bottle jack that i could pump up and release pressure with, is there any small ones that you can think of...
I am in need of some sort of a device to create pressure on a clutch. This is for an automotive racing application. When there is 0 psi, the clutch is disengaged, when there is 225 psi, the clutch is locked. The desired operating range is all the way from 0-225
Ideally, i would like to use...
We are building the worst idea ever used in a drag race -- a FWD drag car. Last year the car went 8.8 @ 167 and now we are building a new chassis to the SFI 25.5 Spec.
The question we are contending with currently is how to setup the rear suspension. We are using a 4 link system, traditional...
so you dont believe tuned length exh. manifold runners work well on a petrol engine? Why is this? We have found decent gains with both methanol and petrol racing engines.
