Thanks for all the comments guys, appreciated. There is about a meter between the turbo and cooler currently (once i re-plumb hot side to closest end tank).
gary
Oh no doubt, but i had always just wondered what was the best way to plumb it in these situations where you have a choice.
No Norm, this is just a std front mount. See the car comes std with a small cooler mounter in front of the Passenger side wheel (drivers side for US guys), and since i...
Thanks Mike,
This is what i had figured, but i was not sure and thought i had better ask an expert!
My car has hot side on the long path, hence why i started looking into all this, and wanted to confirm before i started cutting up the stainless piping !
Thanks again
Gary
Hi All,
Got abit of a question im trying to solve mathematically. i posted here since its auto in nature, but its also thermodynamics i guess..
OK, heres the scenario.
You have a turbocharger pumping into piping , then into the cooler then on to the plenum.
Where is a better...
Hi All,
I made up a plenum thats sits atop of a twin 50mm IDA throttle body. Inside the plenum is two 50mm ram tubes / bellmouths ... now this is on a turbo charged rotary, and i have a 3" inlet coming in the firewall side of the plenum perpendicular to the ramtubes...
My concern is...
