Bob, Minimum expected longitudinal mechanical properies at mid-radius of the round bar or shaft for 4150, normalized and tempered to 220/260 BHN, for a steel forging of 8" to 24" dia. is 109,000 psi tensile and 74,000 psi yield,
elongation 19%, R.A. 42%.
What is the heat treatment on...
I need design equations or helpful reference sources to design a large heavy duty sliding spline shaft and hub in a power train.
Peak torque is 582,000 ft-lb at 0 to 28.6 rpm. (About 3170 HP maximum.)
Shaft might be 16" to 26" diameter.
Spined Hub length could be 16" to...
The torque value for a large ( 16'' to 26'') diameter splined shaft and hub is 582,000 ft-lb at 0 to 28.6 rpm. The machine is also reversible. The female spline can be any where from 20 " to 40 " long. This spline must slide a short distance (up to 1") when at full load...
I need a good reference to help design 16'' to 24'' diameter, heavy duty sliding splined shafts for torque transmission in rolling mills. Can anyone help?
