I am inclined to agre with IRSTuff, asif you look within say a period of 20 seconds the the sensors record a number of rises and falls in 5 second intervals. Thats looking at the local picture, you look at the bigger picture then its starting out rises above the zone and then drops below the...
Hi
I have some programs that require that I install them on the C drive of the pc but the hard drive I have is partition into two 40GB slots. What I want to know is can I remove the partion and keep all the data , or if I do remove the partion will I lose every thing. Also Could I copy all the...
its for a train really and not a room. the duct work etc has been placed. The ac unit is supposed to reach 18 degrees all over the trains within 30mins from a start either in cooling or heating cycle. the majority of temp sensors record the temperature being over the allowed temp. 18 degrees is...
Hi
The is a theatre design I have built, with two levels on it and two platforms either end, at mid height. picture a long retangular space, divided into two levels with aplatform at each end. this is all one enclosed space. I have a temperature data for several areas inside it. The room has...
Hi I have already tried this I Think Not any joy from it, it gives results mentioned above. In order to install a english version of the OS what would I need. MS Tablet PC XP, OneNote etc.....??
I have purchased a Fujitsu Tablet PC. Its operating system runs on Simplified Chinese. I have selected the english language as defalut but it does not seem to convert all the text to english . What do I do to get it o that All text is in English. If I install office onto it in english will it...
I am refering to say where you have some thing like a set of fingers on a comb that must fit into a connector. the comb has like sixteen rectangular fingers or penisulas and 15 slots or inlets.
the connector has 16 holes which must mate with the fingers in the comb.
I need a way of giving...
I am a design engineer, I understood the stuff in college but the thing is I cant remeber. I need to get some guide lines on how to give adequate tolerances on stuff with slots and fingers and general dimensions. I worked where i just had to give the general nominal dimensions but no...
I need to get some instruction or advice on the best and easiest way to give dimensional tolerances. Maybe some good web site or something it is driving me crazy and holding me back.
Case where you have say a row of fingers and slots in a "comb". The slots and the finger have a tolerances...
I am a design process engineer. i used to work for Tool and die company. I was told to do the design and general dimensions, and the boys on the floor making the stuff would do the tolerance of fitting the things. I need some advice on specifying tolerances over distances and as in cut and...
I have installed proe Wildfire on computer at work ... it wont let me alocate the network as working directory ... it using the desktop as its working directory and all other files must be then saved again on to the network help please...?/
Hi when drawing say a part profile before protrusion or revolve the crosshair and pointer dont track each other as normal like in proe2001, whats is causing this and Can it be fixed??
Hi
Was wondering how do you create a video or movie of a part on its own and maybe a system of parts working.. its probably hard and time consuming but anyhow.
