Hello my name is dave aberle. There are several points to check before deciding what methods to best modify your process. First; is the part to be machined held absolutly solid with no side deflection from drill pressure or pull from drill break thru.(Is there appreciable back lash in the...
I am presently turning a 2500 lbs. conical cast steel valve core. It is 37" dia. and 30" long with 10 1.500" thick fins with 3/16" stellite overlay on all surfaces. Tolerences are +- .001" on diameter and +- .003" on lengths RC 60 hardness and 63 finish along OD...
Automated Tooling Systems. ATS developed and built some gillette's assembly lines. Check Gillette for references and talk to KLaus Warner CEO of ATS, a Canadian based company. Tell him Dave Aberle sent you.
Thank-You
Dave Aberle
daberle@sympatico.ca
.
In most general maching applications, recycled oil works as good as any 1980's oils. Also to be considered is the source of the recycled oil; no one wants to end up with old PCB cooling oil in the system. However; Rocool has several tapping compounds that work great on 304 SS so I assume 316...
