M2609
Not sure if you have already solved your problem, but I strongly recommend sliding vane pumps. I've personally used those several times for LPG pumping application when theoretical NPSH; I mean acc. to process data sheet ;-)); were zero. You may want to consider PD pumps but need to reduce...
Ed16, this issue had been raised also by Siemens as a potential hazard in dry gas seal arrangement. I received a safety notice 3 or 4 months earlier.
Special monitoring on outboard seal should be performed.
Regards;
Hi;
For one of our project we need a diesel bullheading pump and we decided to use reciprocating API 674 type for this application. (High pressure pump for opening SSSV valve)
I found some of the reciprocating pump vendors but actually I prefer to work with someone who has experience in...
Control procedure and philosophy depend on process and machine control needs which varies for projects. Do you need any specific type of control system?
Off course that you can bolt engine to basement. In that case I strongly recommend you to use flexible coupling specially rubber coupling in this case same as most diesel driven fire water pump.
I faced with 4 so matured centrifugal compressors (20 years ago) in my project. As we must verify these compressors for new conditions due to process optimisation, I need performance curves for new conditions but I couldn’t get any data from vendor.
Can I use any software to give me guidelines...
As you know, reciprocating compressors designed for constant capacity. It means that your compressor must be fed by design capacity.
Ok. What will happen when inlet capacity decreased? In that case we must increase inlet capacity virtually by using of unloading devices (suction valve unloader...
