Recent content by CEROG

Which module of CATIA do you use? CEROGs CATIA Blog(German): http://www.cad-gaenssler.de/de/cerogs-catia-blog.html

it is not correect to say that each CAD system runs under linux, except CATIA. There are many others which do not run under linux. I found some information that HP XW 4600 has a 64Bit processor. So you should switch to 64 bit... CEROGs CATIA Blog(German)...

Spartan, in fact I can't recommend any of the english books. I know only one of them: Advanced CATIA V5 Workbook - Konwledgeware and Workbenches. I was disappointed about that book because I'd expected more about Knowledgeware. Others are: - Catia V5 Workbook: Release 16 - CATIA V5 FEA...

@ferdo: The list is old which you posted. There is pone which is more actual: http://catia.cad.de/index.php/literaturliste. Thare you can find newer ones. An employee of Hanser told me that is not easy for them to translate books into English and distribute them in other countries. So they...

I found some books in Englsh at amazon. But in my opinion the price is too high. @Ferdo: Perhaps you should read Jens Hansen's book Kochbuch CATIA V5 automatisieren. Vom Powercopy bis zur C# -Programmierung I'm sorry, it is in German. REgards, CEROG CEROGs CATIA Blog(German)...

Spartan, did you look at Hanser's homepage? There are several books about CATIA. I think your first language is German so tat you can read them. Reagrds, CEROG CEROGs CATIA Blog(German): http://www.cad-gaenssler.de/de/cerogs-catia-blog.html

Catiajim hasn't forgotten that. Most of the time V5 exists you could't relink a drawing to another part with a "wrong" UUID. This method is for urgency cases, not as a method for standard use. CEROGs CATIA Blog(German): http://www.cad-gaenssler.de/de/cerogs-catia-blog.html

catjim is wrong. Read this: http://www.catiav5forum.de/wbb3/wbb/index.php?page=Thread&postID=20886&highlight=#post20886 CEROGs CATIA Blog (German)

I think the best way is to use Tools > Standard.

Hi I want to switch a parameter from one input parameter to an other parameter without KWA. For that I created two formulas. To switch the formulas I created two other formulas which control the activity of the first two formulas. Unfortunately I get an error message when switching between...

Which sort of rules do you mean? rules from KWA or the rules which you can get with the fog-icon? Regards, CEROG

For creating BoM in Drawings you've to switch the sheet background. There are two functions (from SP3) Bill of Material and Advanced Bill of Material

V4 or V5? Which Release? Part or Product?

@phuonghieu83: Which message does CATIA tell you? I do not understand from your posting, whether you draft the part without 3D or not. Could you please tell us? Regards, CEROG

Hi DarkEngineer, as as you know, you can't. Regards, CEROG