Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by atmax

  1. atmax

    carbide m10 spirak flute tap on a drilled blind hole

    portable EDM works well, EDM rods will come in various sizes it will core out the center for easy break up of tap.
  2. atmax

    Chamfer vs fillet

    one main factor is machining time, a chamfer can be applied quicker than a fillet rad.
  3. atmax

    5 axis machines feed back

    in the market to purchase a 5 axis Gantry mill, need some feed back on the following machines in mind. first choice is an JOBS-EVER high speed & high power moving gantry with 30i-M Fanuc control. second chioce is a PARPAS model XS-43 high speed Gantry with 30i-M fanuc control, both have approx...
  4. atmax

    stability of A514 Gr. B plate machined

    rolled and welded 5/8 thick plate to a cylinder 10 foot dia x 36" tall with .50 thk. flanges at end end. as rolled and welded condition round within .2 in a free state, after turning ID and OD to Engineering call out dia ending with 3/8 thick skin, releasing cylinder the roundness has moved to...
See more

Part and Inventory Search

Back
Top Bottom