Thank you for your responses. I just did a search, did not find anything applicable.
EdStainless,
In this application the air comes from a compressor. More than 94% of ambient moisture is removed in the inter-stage coolers. The remaining moisture is enough for CaCl2 to form mono and di...
Can stainless steel (304 and 316) corrosion occur by CaCl2 hydrates, mono and di, i.e., can the corrosion occur even if the salt is not in a solution? Appreciate hearing about your experience. Thanks.
Thanks to every one for your comments. For the filter our concern was that the part of the vessel downstream of the filter cartridges would not be protected by the PSV located on the part upstream of the cartridges because the cartridges may be plugged or pressure drop thru the cartridges would...
Last time the attachment operation was not completed.http://files.engineering.com/getfile.aspx?folder=a7334af6-2b9c-47c7-a5e6-5c2ed12b2dfc&file=CCF12152014_0001.pdf
Thanks e43u8 and sshep for responding. Attached is the sketch requested by e43u8.
sshep: Did you mean a PSV on each vessel or each side of the vessel which would mean 2 PSVs on each vessel? Also, I did not understand the "administrative burden on operations" if one (1) PSV is used. Will one(1)...
Would appreciate very much any feedback on overpressure protection design for hydrocarbon liquid cartridge filters and hydrocarbon-water liquid coalescers. I am working on a system which has a cartridge filter located upstream of the coalescer to filter out any solids to prevent plugging of the...
I am working on design of a LPG (propane) truck loading facility for a refinery. Any tip regarding current best practices would be appreciated. I have reviewed API 2510, 2510A and 2003 and NFPA 58. Thanks.
